type 418p orange drop ? round profile polyester film/foil capacitors features ? radial-lead. round profile. ? non-inductively wound, extended foil construction. ? ratings up t o 10 0 0 volts dc. dissipation factor: 0.75% maximum @ 1 khz, +25c encapsulation: conformal coating of orange, flame retardant epoxy. meets ul94v-0 specifications. dielectric/construction: polyester film, single section design. non-inductively wound with extended aluminum foil. specifications capacitance range: capacitance tolerance: 5%, 10%, 20% voltage ratings: 10 0 t o 1000 volts dc operating temperature range: -55c to +85c (at full voltage) voltage derating: at +105c, 70% of +85c rating. at +125c, 50% of +85c rating. lead wire: tinned copper-clad steel, .032 (0.8) diameter, #20 awg insulation resistance: at +25c: at +85c: at +105c: at +125c: 100,000 m for c .25 f 25,000 m -f for c > .25 f 10,000 m for c .15 f 1,500 m -f for c > .15 f 1,500 m for c .17 f 250 m - f f o r c > .17 f 200 m for c .13 f 25 m -f for c > .13 f .001 to 1.0 f cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 type 418p, orange drop ? , polyester film/foil capacitors
general specifications the type 418p orange drop ? is designed and manufactured for operation in a wide range of demanding envi- ronments and applications. type 418p capacitors are wound from the most reliable polyester film and alum- inum foil available and are protected by a rugged conformal coating of orange epoxy. they may be operated up to +125c with proper derating. the 418p series finds use in many commercial and industrial applications, from power supplies and audio amplifiers to welding equipment and ultrasonics. operating temperature range: the standard operating temperature range for polyester f ilm is -55c t o +85c. t he 418p may b e operated at full voltage within this temperature range. the 418p may be operated u p to +105c provided t he d c working voltage i s reduced to 7 0% o f the +85c rating (full rating), and up t o +125c with a 50 % reduction from t he +85c rating (full rating). for more specific details regarding operation above +85c please contact our design engineering department. the maximum operating temperature fo r the 418p polyester film capacitor i s +125c. dielectric w ithst anding v oltage: units rated below 100 0 vdc shall withstand a dc potential of 250% of rated voltage applied between terminals for not more t han 5 seconds. units rated at 1000 v dc shall withstand a dc potential of 200% o f rated voltage applied between terminals for not m ore than 5 seconds. lead b end test: after 3 consecutive 180 bends. no dam age. humidity testing: units subjected to 95% relative hum idity for 72 hours with no voltage applied at +75c. after 4 hours of drying minimum product of insulation resistance and capacitance shall be 5,000 m -f dc voltage life test: 500 hours at +85c at 150% of rated voltage. after test; capacitance shall not have changed by more than 5% of initial value, insulation resistance shall not have decreased by more than 50% of initial value and dissipation factor shall not have increased to more than 1.0%. in addition, there should be no open or short circuits, and no sign of visible damage. typical temperature characteristics: cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 type 418p, orange drop ? , polyester film/foil capacitors
ordering/part number information 418p 104 9 6 l d 3 (xxxx) a suffix may be added by the factory to denote special construction. 1 = 0.187 (4.7) 0.030 (0.8) 2 = 0.250 (6.4) 0.030 (0.8) 3 = 1.250 (32) mi nimum custom lead lengths available upon request. a = straight lead b,f = hairpin crimp d,g,h = hockey stick crimp case code see standard sizes/ratings table d-c voltage rating expressed in hundreds of volts capacitance tolerance 0 = 20%; 9 = 10%; 5 = 5% capacitance expressed in picofarads. the first two digits are the significant figures, the third is the number of zeros following. (i.e. 104 = 100000 pf = .1 f) cde type number identifies the basic capacitor design. standard marking format sample marking on unit cde418p600v 104k 9810 cde 418p 600v 104k 9810 description cde electronics identification type number d-c voltage rating, volts capacitance and tolerance code weekly date code (i.e. 10th week of 1998) tolerance codes per eia standards k m 5% 10% 20% lead length terminal j cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 type 418p, orange drop ? , polyester film/foil capacitors
standard lead styles terminal a terminal b,f terminal d,g,h standard lead spacings case code j k l m 0.500 0.688 0.969 1.344 (12.7) (17.5) (24.6) (34.1) 0.500 0.688 0.969 1.344 (12.7) (17.5) (24.6) (34.1) 0.375 0.375 0.719 1.094 (9.5) (9.5) (18.3) (27.8) 0.394 (10) 0.590 (15) 0.886 (22.5) 0.295 (7.5) 0.394 (10) 0.590 (15) 1.083 (27.5) 0.197 (5) 0.295 (7.5) term. a term. b term. d term. f term. g term. h s --- --- --- cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 type 418p, orange drop ? , polyester film/foil capacitors
type 418p standard sizes/ratings 2 10 0 vdc 200 vdc 400 vdc 2 1. to complete part number for specific tolerance, terminal style and lead length please refer t o ordering/part number information page. the 4 18p s eries i s available through t he cde distribution network on special order. dimensions in inches, metric (mm) in parenthesis. .027 .033 .039 .047 .056 .068 .082 .1 .12 .15 418p27391j 418p33391j 418p39391j 418p47391j 418p56391j 418p68391j 418p82391k 418p10491k 418p12491k 418p15491k .70 .70 .70 .70 .70 .70 .90 .90 .90 .90 (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (22.9) (22.9) (22.9) (22.9) .35 .35 .35 .35 .35 .35 .40 .40 .45 .45 (8.9) (8.9) (8.9) (8.9) (8.9) (8.9) (10.2) (10.2) (11.4) (11.4) .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 418p18491l 418p22491l 418p27491l 418p33491l 418p39491m 418p47491m 418p56491m 418p68491m 418p82491m 418p10591m 1.20 1.20 1.20 1.20 1.60 1.60 1.60 1.60 1.60 1.60 (30.5) (30.5) (30.5) (30.5) (40.6) (40.6) (40.6) (40.6) (40.6) (40.6) .45 .45 .50 .50 .50 .50 .60 .60 .65 .70 (11.4) (11.4) (12.7) (12.7) (12.7) (12.7) (15.2) (15.2) (16.5) (17.8) .0056 .0068 .0082 .01 .012 .015 .018 .022 .027 .033 .039 .047 418p56292j 418p68292j 418p82292j 418p10392j 418p12392j 418p15392j 418p18392j 418p22392j 418p27392j 418p33392k 418p39392k 418p47392k .70 .70 .70 .70 .70 .70 .70 .70 .70 .90 .90 .90 (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (22.9) (22.9) (22.9) .33 .33 .33 .33 .33 .33 .33 .33 .35 .38 .38 .38 (8.4) (8.4) (8.4) (8.4) (8.4) (8.4) (8.4) (8.4) (8.9) (9.7) (9.7) (9.7) .056 .068 .082 .1 .12 .15 .18 .22 .27 .33 .39 .47 418p56392l 418p68392l 418p82392l 418p10492l 418p12492l 418p15492l 418p18492l 418p22492l 418p27492m 418p33492m 418p39492m 418p47492m 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.60 1.60 1.60 1.60 (30.5) (30.5) (30.5) (30.5) (30.5) (30.5) (30.5) (30.5) (40.6) (40.6) (40.6) (40.6) .38 .38 .40 .40 .45 .45 .50 .50 .47 .47 .50 .55 (9.7) (9.7) (10.2) (10.2) (11.4) (11.4) (12.7) (12.7) (11.9) (11.9) (12.7) (14.0) .001 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .01 .012 .015 .018 .022 .027 .033 418p10294j 418p12294j 418p15294j 418p18294j 418p22294j 418p27294j 418p33294j 418p39294j 418p47294j 418p56294j 418p68294j 418p82294j 418p10394j 418p12394j 418p15394j 418p18394k 418p22394k 418p27394k 418p33394k .70 .70 .70 .70 .70 .70 .70 .70 .70 .70 .70 .70 .70 .70 .70 .90 .90 .90 .90 (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (22.9) (22.9) (22.9) (22.9) .30 .30 .30 .30 .30 .30 .30 .30 .30 .33 .33 .35 .35 .35 .38 .38 .38 .40 .40 (7.6) (7.6) (7.6) (7.6) (7.6) (7.6) (7.6) (7.6) (7.6) (8.4) (8.4) (8.9) (8.9) (8.9) (9.7) (9.7) (9.7) (10.2) (10.2) .039 .047 .056 .068 .082 .1 .12 .15 .18 .22 .27 .33 .39 .47 418p39394l 418p47394l 418p56394l 418p68394l 418p82394l 418p10494l 418p12494l 418p15494l 418p18494m 418p22494m 418p27494m 418p33494m 418p39494m 418p47494m 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.60 1.60 1.60 1.60 1.60 1.60 (30.5) (30.5) (30.5) (30.5) (30.5) (30.5) (30.5) (30.5) (40.6) (40.6) (40.6) (40.6) (40.6) (40.6) .40 .40 .45 .45 .52 .52 .55 .57 .60 .60 .65 .65 .72 .80 (10.2) (10.2) (11.4) (11.4) (13.2) (13.2) (14.0) (14.5) (15.2) (15.2) (16.5) (16.5) (18.3) (20.3) value, f part number 1 l max dia max value, f part number 1 l max dia max cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 type 418p, orange drop ? , polyester film/foil capacitors
type 418p standard sizes/ratings 2 600 vdc 1000 vdc 2 the 418p series is available through the cde distribution network on special order. dimensions in inches, metric (mm) in parenthesis. to complete part number for specific tolerance, terminal style and lead length please refer to ordering/part number information page. .001 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .01 .012 .015 .018 .022 418p10296j 418p12296j 418p15296j 418p18296j 418p22296j 418p27296j 418p33296j 418p39296j 418p47296j 418p56296j 418p68296j 418p82296k 418p10396k 418p12396k 418p15396k 418p18396k 418p22396k .70 .70 .70 .70 .70 .70 .70 .70 .70 .70 .70 .90 .90 .90 .90 .90 .90 (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (17.8) (22.9) (22.9) (22.9) (22.9) (22.9) (22.9) .30 .33 .33 .33 .33 .35 .35 .38 .38 .40 .40 .40 .40 .40 .40 .45 .45 (7.6) (8.4) (8.4) (8.4) (8.4) (8.9) (8.9) (9.7) (9.7) (10.2) (10.2) (10.2) (10.2) (10.2) (10.2) (11.4) (11.4) .027 .033 .039 .047 .056 .068 .082 . 1 .12 .15 .18 .22 .25 418p27396l 418p33396l 418p39396l 418p47396l 418p56396l 418p68396l 418p82396l 418P10496L 418p12496m 418p15496m 418p18496m 418p22496m 418p25496m 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.60 1.60 1.60 1.60 1.60 (30.5) (30.5) (30.5) (30.5) (30.5) (30.5) (30.5) (30.5) (40.6) (40.6) (40.6) (40.6) (40.6) .45 .45 .55 .55 .60 .60 .65 .65 .70 .70 .80 .80 .80 (11.4) (11.4) (14.0) (14.0) (15.2) (15.2) (16.5) (16.5) (17.8) (17.8) (20.3) (20.3) (20.3) .001 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .01 418p102910j 418p122910j 418p152910j 418p182910j 418p222910j 418p272910k 418p332910k 418p392910k 418p472910k 418p562910k 418p682910k 418p822910k 418p103910k .70 .70 .70 .70 .70 .90 .90 .90 .90 .90 .90 .90 .90 (17.8) (17.8) (17.8) (17.8) (17.8) (22.9) (22.9) (22.9) (22.9) (22.9) (22.9) (22.9) (22.9) .33 .33 .33 .35 .35 .35 .35 .38 .40 .43 .43 .48 .48 (8.4) (8.4) (8.4) (8.9) (8.9) (8.9) (8.9) (9.7) (10.2) (10.9) (10.9) (12.2) (12.2) .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .1 418p123910l 418p153910l 418p183910l 418p223910l 418p273910l 418p333910l 418p393910m 418p473910m 418p563910m 418p683910m 418p823910m 418p104910m 1.20 1.20 1.20 1.20 1.20 1.20 1.60 1.60 1.60 1.60 1.60 1.60 (30.5) (30.5) (30.5) (30.5) (30.5) (30.5) (40.6) (40.6) (40.6) (40.6) (40.6) (40.6) .48 .48 .58 .58 .65 .65 .65 .65 .75 .75 .85 .85 (12.2) (12.2) (14.7) (14.7) (16.5) (16.5) (16.5) (16.5) (19.1) (19.1) (21.6) (21.6) 1 value, f part number 1 l max dia max value, f part number 1 l max dia max cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 type 418p, orange drop ? , polyester film/foil capacitors
dv/dt specifications maximum pulse rise time (dv/dt) in volts/sec cap value (f) 100v 200v 400v 600v 1000v .001 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .01 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .1 .12 15 .18 .22 .25 .27 .33 .39 47 .56 .68 .82 1.0 2000 1800 1700 1500 1400 1300 1100 1000 900 800 700 600 600 600 500 400 400 400 300 300 300 5900 5400 4900 4500 4100 3600 3300 3000 2700 2400 2100 1900 1800 1500 1400 1200 1100 1000 900 800 800 700 600 600 500 11000 10100 9200 8400 7600 6900 6300 5700 5100 4400 4000 3600 3200 2800 2500 2300 2100 1900 1700 1600 1400 1200 1100 1000 1000 900 800 700 22100 20200 18100 16500 14900 13500 12200 11200 10200 9300 8500 7200 6600 6000 5400 4900 4400 3700 3300 3100 2800 2600 2300 2100 1900 1600 1500 1300 1200 1100 1100 22700 20800 18600 17000 15300 13800 12500 11500 10500 9000 8200 7400 6700 5700 5100 4700 4200 3800 3400 2900 2700 2400 2200 2000 1800 note: dv/dt ratings based on measurements made at the junction of the wire leads and capacitor body dimensions in inches, metric (mm) in parenthesis. cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 type 418p, orange drop ? , polyester film/foil capacitors
4 notice and disclaimer: all product drawings, descriptions, specifcations, statements, information and data (collectively, the information) in this datasheet or other publication are subject to change. the customer is responsible for checking, confrming and verifying the extent to which the information con - tained in this datasheet or other publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without any guaran - tee, warranty, representation or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on the knowledge that the cornell dubilier company providing such statements (cornell dubilier) has of operating conditions that such cornell dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa - tion regarding any such matter C and cornell dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by cornell dubilier with reference to the use of any cornell dubilier products is given gratis (unless otherwise specifed by cornell dubilier), and cornell dubilier assumes no obligation or liability for the advice given or results obtained. although cornell dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi - cated in such warnings, cautions and notes, or that other safety measures may not be required. ac
|
